Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA5510 securit plus E0/0,0/1 ports update to Gigabit Ethernet

http://www.cisco.com/en/US/docs/security/asa/asa72/release/notes/asarn723.html#wp272663

The ASA 5510 adaptive security appliance now has the security plus license to enable GE (Gigabit Ethernet) for port 0 and 1. If you upgrade the license from base to security plus, the capacity of the external port Ethernet0/0 and Ethernet0/1 increases from the original FE (Fast Ethernet) (100 Mbps) to GE (1000 Mbps). The interface names will remain Ethernet 0/0 and Ethernet 0/1. Use the speed command to change the speed on the interface and use the show interface command to see what speed is currently configured for each interface

I activate the security plus and failover is enabled. But I cannot "speed 1000" in interface E0/0.E0/1

With ? in interface E0/0,E0/1 ,I can see 10/100 only...

2 REPLIES
Cisco Employee

Re: ASA5510 securit plus E0/0,0/1 ports update to Gigabit Ethern

What version of software are you currently running on the ASA? You would need to be at least on version 7.2.3 or above. I would recommend upgrading to

version 8.0.5 or 8.2.2.

Please check point 2) at the bottom of the URL for your reference:

http://www.cisco.com/en/US/products/ps6120/prod_models_comparison.html

Hope that helps.

New Member

Re: ASA5510 securit plus E0/0,0/1 ports update to Gigabit Ethern

Yeah, I just noticed.

Let me  update the ios and try .

Thx.

630
Views
5
Helpful
2
Replies
CreatePlease login to create content