Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

ASA5520 and DHCP Server

I setup an interface on my ASA5520 to be a guest network so visitors of our company would have access to the internet. However, I'm not able to get DHCP working properly. If I hardcode the settings, everything works fine. Can someone look at this config and let me know if I'm missing something? Thanks.

interface GigabitEthernet0/2

nameif guest

security-level 50

ip address 10.1.1.254 255.255.255.0

dns domain-lookup guest

dns server-group DefaultDNS

name-server 68.6.16.25

name-server 68.6.16.30

nat (guest) 10 0.0.0.0 0.0.0.0

dhcpd address 10.1.1.1-10.1.1.10 guest

dhcpd dns 68.6.16.25 68.6.16.30 interface guest

dhcpd update dns both override interface guest

dhcpd enable guest

2 REPLIES

Re: ASA5520 and DHCP Server

The config for basic dhcp is fine, I have seen scenarios where dhcpd get stuck by disabling and re-enabling it activates ..

try

no dhcpd enable gues, then re-enable it

dhcpd enable guest

if not then

debug dhcpd event

debug dhcpd packet

Rgds

Jorge

Community Member

Re: ASA5520 and DHCP Server

Thanks!! Disabling and Enabling fixed the issue.

I hate when that's the problem.

283
Views
5
Helpful
2
Replies
CreatePlease to create content