Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

ASA5520-CSC10-K9 support HA feature set ?

Hi, All

Is ASA5520-CSC10-K9 bundle support HA feature set or We have to buy another HA license for the same?

Because I want to buy 2 Nos. of ASA5520-CSC10-K9 for running in HA mode but  it's not showing any HA feature set in configuration tools.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: ASA5520-CSC10-K9 support HA feature set ?

Sandeep,

If you have ASA5520 in a failover pair and you choose to have a CSC module then, both units should have a CSC module for hardware compatibility.

If one unit's CSC module goes down then the other unit (which is presently active) will take over and the CSC module in it will start to scann the traffic.

Here is the link to configure the CSC module in failover:

http://www.cisco.com/en/US/docs/security/csc/csc63/administration/guide/csc6.html#wp1041777

There is no failover license in particular for the CSC module. It is same base and the plus license that you always get.

-KS

2 REPLIES
Cisco Employee

Re: ASA5520-CSC10-K9 support HA feature set ?

Sandeep,

If you have ASA5520 in a failover pair and you choose to have a CSC module then, both units should have a CSC module for hardware compatibility.

If one unit's CSC module goes down then the other unit (which is presently active) will take over and the CSC module in it will start to scann the traffic.

Here is the link to configure the CSC module in failover:

http://www.cisco.com/en/US/docs/security/csc/csc63/administration/guide/csc6.html#wp1041777

There is no failover license in particular for the CSC module. It is same base and the plus license that you always get.

-KS

Re: ASA5520-CSC10-K9 support HA feature set ?

Thanks for reply

U mean to say that this ASA5520-CSC10-K9 bundle support HA feature set which is ordered through cisco configuration tool ?

or

I have to ordered separate AS5520-K9 bundle box with HA license and separate CSC10 module?

462
Views
0
Helpful
2
Replies
CreatePlease to create content