Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

ASA5520 drop packets

Greeting

I have asa5520 version 7.2(4). it physically connected to cat6500.

The interface both inside and outside drip packets, but the cat6500's related interface do not drop packets.

the interface in asa5520:

# sh int GigabitEthernet 0/1.10

Interface GigabitEthernet0/1.10 "inside", is up, line protocol is up

MAC address 1200.0178.0312, MTU 1500

IP address 10.10.10.1, subnet mask 255.255.255.0

Traffic Statistics for "inside":

1562620134 packets input, 2182712583398 bytes

843191958 packets output, 36467109917 bytes

25687 packets dropped

the box connected to cat6500 is linked by cooper. If I change it to fibre, will it approval?

does it mean the box is not capible for the traffic?

Any comments will be appreciated

Thanks in advance

1 REPLY

Re: ASA5520 drop packets

Check speed/duplex settings on both devices, check input/output errors, CRC's

If the above are all 0 - then you could have a cable issue, try changing cables.

HTH>

183
Views
0
Helpful
1
Replies
CreatePlease to create content