Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA5520 Error message "vPif_isVpifNumValid: pifNum out of range!"

Hello.

When trying to access the asa (8.0(3)) with asdm the console send follwing error message:

vPif_isVpifNumValid: pifNum out of range!

vPif_getVpif: bad vPifNum(0xa6) from 87EBC81 from 83833B4

Have a strong suspicion that it is a hardware failure (since asdm has worked and have tried to restart the box)

can not see any errors with any show commands, but could it be a RAM error (anyone who have similar experience and can confirm ?).

2 REPLIES
Bronze

ASA5520 Error message "vPif_isVpifNumValid: pifNum out of range!

Messages are due to SNMP polling. Might be worth locating and stopping the NMS station that is polling the ASA to confirm. I don't find any defects for this fixed since early 8.0. Might be worth going to 8.0.5 and seeing if issue persists

http://www.cisco.com/cisco/software/release.html?mdfid=279916878&flowid=4374&softwareid=280775065&release=8.4.4.1.ED&relind=AVAILABLE&rellifecycle=&reltype=latest

Matthew

New Member

hello:

hello:

when trying to access use ssh  to connect the firewall ,my  asa5515x have the same problem ,so do you have good ideas to slove this QA.thx


553
Views
0
Helpful
2
Replies
CreatePlease login to create content