Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ASA5520 Management interface dropping icmp packets

I have an asa5520 running in transparent mode and the management interface is dropping icmp packets. The interface is connected to a 6509 10/100/1000 interface and both are set to auto/auto. Both the cable and switch port have been changed. I have replaced the ASA and the problem still exists.

1 REPLY
Bronze

Re: ASA5520 Management interface dropping icmp packets

Instead of using auto/auto you should change the settings manually to say 100 Mbps and Full duplex on both ends. Also, you will have to configure ASA to allow ICMP from one interface to the other.

120
Views
0
Helpful
1
Replies