Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ASA5520 route / nat problem

problem:

i can ping from local PC to inside int of fw but unable to ping outside interface.

debug icmp trace shows traffic passing as normal but on PC it gets "request timed out"

1 REPLY
New Member

Re: ASA5520 route / nat problem

Hi,

If you want to enable ping to the outside interface, you have to addd this command :

icmp permit ip_address net_mask echo outside

icmp permit ip_address net_mask echo-reply outside

this will enable ping on the outside interface.

I think you need to do this within the context level it self, not on the system level. the ip address should be within the context inside range.

regards

98
Views
0
Helpful
1
Replies