Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

ASA5520 standby address. Can I use it an alternative default gateway?

I have a pair of ASA5520s in Active/standby.

I have a bunch of devices on a VLAN that currently use .254 as the gateway address that I want to eventually migrate to .1 as the gateway adress.

If I configure:

ip address 192.168.170.1 255.255.255.0 standby 192.168.170.254

Will devices on the 192.168.170.0/24 subnet be able to use either .1 or .254 as the gateway address?

TIA

Everyone's tags (6)
1 REPLY

ASA5520 standby address. Can I use it an alternative default gat

Hello,

Yes, they will be able to use the 170.1... The 254 will be just to monitor the state of the secondary device.

So the IP that will always be used will be 170.1

Any other question just let me know.

Regards,

Julio

DO rate all the helpful posts

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
423
Views
0
Helpful
1
Replies
CreatePlease to create content