ASASM, Multiple Context with mixed Transparent and Routed modes
What I wish to do, is have the internet gateway in transparent mode as many networks will not go through an internal firewall. For internal networks which will go through a routed firewall context, i then need their traffic to go through the primary gateway - which will be a transparent mode context.
As per the subject, the guides for 9.x series don't seem to suggest a way of having multiple context mode with both routed and transparent modes within the asasm.
So, configuring the 6k5, where do I put vrf-lite and how to I configure the vlans, and the routing? The actual setup, is in active/passive mode with VSS to another chassie - this all seems solid and working.
I've attached a very basic diagram to get a logical idea of what I'm after.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...