Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

ASDM 7.6(1) unable to load the firewall configuration

Hello, I am unable to load the asdm from my workstation anymore. It has been awhile since I have used the ASDM on here because i usually just use putty to make changes.  I am however tying to setup a VPN connection and need into the ASDM.  Is there a problem with this version of ASDM? I have some of the earlier version but not the latest version. Please advise.

Thanks

Brian

2 REPLIES

Hi Brian -

Hi Brian -

Check the "asdm image <path>" command from the CLI.  Does the entry exist and does it point to an image that is actually on the ASA?

PSC

Silver

I would also like to add that

I would also like to add that make sure you have permission to access the asdm from your workstation.

Firewall should allow your PC to access it via asdm and http should be enabled:

http server enable

http 192.168.1.0 255.255.255.0 interface name  

179
Views
0
Helpful
2
Replies
CreatePlease to create content