I have a cisco ASA 5510 that I have set up currently to access via ASDM through the Inside interface. When I VPN in using our older VPN server I can connect to it fine.
I recently set up the ASA to also be a VPN server which will eventually replace the older server for our HQ. I noticed that when I'm VPN using the ASA as the VPN server, I can only ASDM to the public which I prefer not to allow. Access to the inside doesn't seem to work this way. Any ideas as to what might be causing this? I would post configurations for assistance but I'm unsure what configurations if any would be causing this. I'm assuming it's some thing I need to adjust in the VPN configuration. Any help would be appreciated. Thanks!
Thanks for the responses. Your post was the correct response needed. I had actually found it on this site under another post just before you posted here. I appreciate all the help as this now has fixed the issue. Thanks.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...