Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

ASDM can't see routes

When using the ASDM I go to monitoring > routing > routes but there are no routes listed. If I telnet in and do a show route, they are all there. Am I not using the product correctly?

3 REPLIES
Green

Re: ASDM can't see routes

You are using it correctly and the routes should display. Have you tried the "Refresh" button? What version of ASDM?

New Member

Re: ASDM can't see routes

Yes. Tried the refresh button many times with no results. I am using ASDM version 1.5(22)which is 6.02 I believe.

New Member

Re: ASDM can't see routes

I am also having this problem on a PIX515E I am running. It is running 7.2(3) with ASDM 5.2(3). I have upgraded it to asdm 5.2(4) and the issue is still there. Any help on this would be appreciated.

the only error I get is in the bottom left hand corner of the ASDM "Error in getting/parsing the monitoring data"

204
Views
0
Helpful
3
Replies
CreatePlease to create content