Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

ASDM - does not display all the rules

Hello,

we replaced our PIX525 firewall with an ASA 5540 firewall, and now we see some strange behavior in ASDM.

ASDM does not display all the rules, but i see all all the rules in cli.

What can be the problem?

inside-asa# show ver

Cisco Adaptive Security Appliance Software Version 8.2(5)

Device Manager Version 6.4(5)

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions

ASDM - does not display all the rules

Hello Erik,

Do you think you can do an upgrade to 6.4(7) as this is the recommended version by CISCO when you are running 8.2(5).

Regards,

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
8 REPLIES

ASDM - does not display all the rules

Hello Erick,

Are you talking just about the ACL rules?

Regards,

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
Community Member

ASDM - does not display all the rules

Yes, just about the ACL rules. We does not use NAT because this firewall is an internal firewall.

 

 

Community Member

ASDM - does not display all the rules

Hello,

I really need help.

Have somebody else find this problem?

Community Member

ASDM - does not display all the rules

In addition, I noticed that the rules under CLI is have different order than the rules in the ASDM.

ASDM - does not display all the rules

Hello Erik,

Do you think you can do an upgrade to 6.4(7) as this is the recommended version by CISCO when you are running 8.2(5).

Regards,

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
Community Member

ASDM - does not display all the rules

Sure, i think we can manage that but i can only reply after one or two weeks ( change management ).

But i thought that our ASDM version is OK with this ASA version, see the link,

http://www.cisco.com/en/US/docs/security/asa/asa82/release/notes/asarn82.html#wp309157

Thank you for you help.

Community Member

ASDM - does not display all the rules

Thanks for the help, we updated the ASDM software version on a test ASA firewall and everything is OK.

6.4.5(206) is OK too.

ASDM - does not display all the rules

Hello Erik,

Great to hear that everything is working now.

Have a wonderful day,

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
723
Views
0
Helpful
8
Replies
CreatePlease to create content