06-01-2009 08:56 AM - edited 03-11-2019 08:38 AM
Hello ,
i have 6513 switch with FWSM, i was a able to manage FWSM through the ASDM , then after doing some changes (adding log to the access-list)on the ASDM and then apply the changes, it gave an error that it is unable to submit changes . After that, i tried to access asdm and it gave an error: "asdm is unable to read the configuration from the fwsm. Check the configuration on FWSM and then refresh"......
FWSM Firewall Version 3.2(2)
Device Manager Version 5.2(1)F
Any idea to solve this problem.
Regards,
George
Solved! Go to Solution.
06-04-2009 04:34 PM
Pls. upgrade the ASDM to asdm-613f.bin
http://www.cisco.com/cgi-bin/tablebuild.pl/cat6000-fwsm
command
copy tftp flash:asdm
good luck.
06-04-2009 04:34 PM
Pls. upgrade the ASDM to asdm-613f.bin
http://www.cisco.com/cgi-bin/tablebuild.pl/cat6000-fwsm
command
copy tftp flash:asdm
good luck.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide