Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

ASDM not loading after giving error

Hello ,

i have 6513 switch with FWSM, i was a able to manage FWSM through the ASDM , then after doing some changes (adding log to the access-list)on the ASDM and then apply the changes, it gave an error that it is unable to submit changes . After that, i tried to access asdm and it gave an error: "asdm is unable to read the configuration from the fwsm. Check the configuration on FWSM and then refresh"......

FWSM Firewall Version 3.2(2)

Device Manager Version 5.2(1)F

Any idea to solve this problem.

Regards,

George

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: ASDM not loading after giving error

Pls. upgrade the ASDM to asdm-613f.bin

http://www.cisco.com/cgi-bin/tablebuild.pl/cat6000-fwsm

command

copy tftp flash:asdm

good luck.

1 REPLY
Cisco Employee

Re: ASDM not loading after giving error

Pls. upgrade the ASDM to asdm-613f.bin

http://www.cisco.com/cgi-bin/tablebuild.pl/cat6000-fwsm

command

copy tftp flash:asdm

good luck.

148
Views
5
Helpful
1
Replies
CreatePlease to create content