Ive got an ASA5510 running v7 with device manager 5.0 and i wish to upgrade to v5.2. any ideas how this can be done? can i jump freom 5.0 to 5.2 or do i first have to upgrade to 5.1 then 5.2? also, when i logged in to cisco, i couldnt find a full version for asa v7 only a preview version, is this correct?
All you need to do is d/l the version of ASDm and tftp into the flash. You can jump - it all depends on your version of IOS - there are specific versions of ASDM to ASA IOS. Check the software table. The configure:-
thanks for the prompt reply. In my current ASDM software (wihtin file management) the asdm image is asdm-507.bin and asa707-k8.bin. Also, as i mentioned earlier, i cant seem to find the ASDM5.2 for asa v7.(when i login to the cisco website) any ideas where this might be?
how do you reply so quickly? sureley working for monster you must be very busy, do you have an RSS feed for this topic? Im just wondering how i can keep my finger onthe pulse and be aware of new posts(appart from pressing F5 onthe main forum page). any suggestions would be helpful
DocumentationCode download linksGoalRequirementLimitationsSupported ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and UCS-E Blades:Step by Step ConfigurationConfigure one of the connectivity options to access the Cisco IMC from the n...
Firepower Threat Defense (NGFWv) on UCS E-series - Transparent Mode in HA
DocumentationCode download linksGoalRequirementLimitationsSupported ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and UCS-E Blades:Step by Step ConfigurationCo...
I am currently unable to specify "crypto keyring" command when configuring VPN connection on my cisco 2901 router.
The following licenses have been activated on my router :