Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

ASDM Upgrade

Have upgraded back to 7.22, also ASDM to 522, now I can not access via ASDM. I am using 2003 RADIUS for authentication, I get a username and password prompt, then nothing.

Anyone know the answer?

5 REPLIES

Re: ASDM Upgrade

Try this-

asdm image disk0:/

HTH and please rate.

Community Member

Re: ASDM Upgrade

Thanks for the reply, I changed that as part of the upgrade.

Cisco Employee

Re: ASDM Upgrade

If you are indicating that authentication is failing, then you need to look at the output of

debug aaa authentication

debug radius

to see why. Also, "show aaa-server" may help as well.

Sincerely,

David.

Community Member

Re: ASDM Upgrade

RADIUS works fine with SSH, it is off and on with VPN Client, but works.

It worked with no problem before the upgrade.

I have now donwgraded and the problem persists.

Community Member

Re: ASDM Upgrade

http server enable

http 10.21.36.0 255.255.255.255 inside

then check the PIX for asdm filename

ie Show flash

asdm image flash:/your file name

or you can rename the file according to the above line.

-Karthik

146
Views
0
Helpful
5
Replies
CreatePlease to create content