Re: ASDM Will Not Open - Receive Error: Unconnected sockets not
I had the same thing going on with my ASA5510. I wasn't able to use the ASDM on a computer connected on the inside interface, I had to go in on the management interface. Then I had to physically move my ASA the other day, so it got powered down and moved from one room to another. When I booted it back up and tried ASDM the other day, suddenly the silly thing decided to work. If you can, you might try powering down your ASA and powering it back on.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...