12-23-2009 12:29 AM - edited 03-11-2019 09:51 AM
Hi,
I am having PIX ver 8.0
I want to allocate 512kb bandwidth for inbound remote access VPN users accessing LAN network behind PIX. My PIX is acting as VPN server and users on internet.
Can someone help me guide how to configure it using modular policy framework?
Thanks in advance.
Regards,
Akshay
12-23-2009 03:24 AM
Hi ,
Check out the below link for PIX/ASA Bandwidth allocation for application and usage.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml
Hope this helps your query !!
Regards
Ganesh.H
12-23-2009 07:38 AM
https://supportforums.cisco.com/docs/DOC-1230 also explains it with examples.
You will need something like
ASA(config)# priority-queue outside
ASA(config-cmap)# class-map TG1-rest-class
ASA(config-cmap)# match tunnel-group tunnel-grp1
ASA(config-cmap)# match flow ip destination-address
ASA(config)# policy-map police-priority-policy
ASA(config-pmap-c)# class TG1-rest-class
ASA(config-pmap-c)# police output 512000
ASA(config-pmap-c)# service-policy police-priority-policy interface outside
I hope it helps.
PK
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: