Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Bandwidth Allocation on PIX 8.0

Hi,

I am having PIX ver 8.0

I want to allocate 512kb bandwidth for inbound remote access VPN users accessing LAN network behind PIX. My PIX is acting as VPN server and users on internet.

Can someone help me guide how to configure it using modular policy framework?

Thanks in advance.

Regards,

Akshay

2 REPLIES

Re: Bandwidth Allocation on PIX 8.0

Hi ,

Check out the below link for PIX/ASA Bandwidth allocation for application and usage.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml

Hope this helps your query !!

Regards

Ganesh.H

Cisco Employee

Re: Bandwidth Allocation on PIX 8.0

https://supportforums.cisco.com/docs/DOC-1230 also explains it with examples.

You will need something like

ASA(config)# priority-queue outside


ASA(config-cmap)# class-map TG1-rest-class
ASA(config-cmap)# match tunnel-group tunnel-grp1
ASA(config-cmap)# match flow ip destination-address

ASA(config)# policy-map police-priority-policy
ASA(config-pmap-c)# class TG1-rest-class
ASA(config-pmap-c)# police output 512000
ASA(config-pmap-c)# service-policy police-priority-policy interface outside

I hope it helps.

PK

631
Views
0
Helpful
2
Replies