10-19-2009 11:48 AM - edited 03-11-2019 09:27 AM
Hello, Is it possible to apply bandwidth limits to an ACL. SMTP traffic from outside to inside should be 1MB
SSH traffic from inside to outside should be 100K.
Access-list OUTSIDE applied on Outside Interface
Access-list INSIDE applied on Inside Interface
access-list OUTSIDE extended permit tcp any host 12.12.12.12 eq smtp
access-list INSIDE extended permit tcp 10.10.10.0 255.255.255.0 any eq ssh
Solved! Go to Solution.
10-19-2009 11:58 AM
You cannot do what you want with just ACLs.
But you can police traffic based on ACLs on the ASA using Modular Policy Framework (class-maps, policy=-maps etc).
Document https://supportforums.cisco.com/docs/DOC-1230 shows exactly how you can do what you want.
I hope it helps.
PK
10-19-2009 11:58 AM
You cannot do what you want with just ACLs.
But you can police traffic based on ACLs on the ASA using Modular Policy Framework (class-maps, policy=-maps etc).
Document https://supportforums.cisco.com/docs/DOC-1230 shows exactly how you can do what you want.
I hope it helps.
PK
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide