Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Bandwidth Management on ASA 9.1

Hi All,

could you help me, i need configure cisco asa QOS and the rule like below :

i have 3 subnet behind the asa and i need configure QOS with rule like 1 subnet i give 50% bandwidht and 2 subnet i give 25 % each. but if the traffic to internet is empty each subnet can used 100 % bandwidth .

3 REPLIES
VIP Purple

That's not possible with the

That's not possible with the ASA. The QoS features on the ASA are very limited. Do you have control over the WAN-router in front of the firewall? If that's an IOS router it will be possible.

New Member

Hi Karsten, Ok thanks for

Hi Karsten,

 

Ok thanks for your explanation

if you can define time range

if you can define time range for example from 9-00 till 12-00 when traffic is maximum so you configure time range based  QOS with rule like 1 subnet  give 50% bandwidht and 2 subnet i give 25 % each

 

in another time it will not work

 

another option is executing script on some server or router

here is example how to execute eem script on 3750 and ssh to asa

https://supportforums.cisco.com/discussion/12292956/eem-ssh-asa-and-issue-commands

 

 

and dont forget to rate post

159
Views
0
Helpful
3
Replies
CreatePlease to create content