06-08-2007 04:14 AM - edited 03-11-2019 03:27 AM
hi,
we had 1 5520 & have purchased 1 new asa 5520. we want to make cable based active/active failover on this 2 devices. can someone help me with sample config? i found some docs but that were for pix. i need on asa.
06-08-2007 04:19 AM
Below is the 7.2 doc for failover.
Thanks,
Chad
06-08-2007 04:27 AM
could u please tell me my config is correct or wrong:
interface GigabitEthernet0/3
description STATE Failover Interface
failover
failover link failover GigabitEthernet0/3
failover interface ip failover 192.168.50.1 255.255.255.0 standby 192.168.50.2
06-08-2007 04:36 AM
You'll need to do that for each context that you have. You also need to configure the failover groups.
See this doc. Will show you everything you need for A/A failover.
Thanks,
Chad
06-08-2007 04:48 AM
can't active/standby filover be configured in asa in cable based failover mode?
06-08-2007 04:54 AM
Your original post said Active/Active. Which one are you trying to do?
Chad
06-08-2007 04:57 AM
if i connect the 2nd asa in cable based failover mode, will the replication be done automatically? don't i need to specify the lan, wan side ip address also??
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide