Hi, In my company I need to make an tunnel and I will make it and 100 MB data has to be move on other site via tunnel but I am not able to reconize how much minimum speed we require so that the data easily to move. Can anyone tell me how we do the calculation? Thanks
Basically, 100*8 = how many Mbits, divide that your bandwidth and it would tell you howmany seconds it should take. I.e. 100MB over a 1.5Mbps connection would take approx 533 seconds to transfer. Now, this isn't taking any packet overhead in account, but it should give you rough estimates.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...