Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Can asa5550 run without SSM-4GE-INC?

                   I've inherited an ASA5550 which is missing its SSM-4GE-INC - it was taken out to upgrade a 5540, which is now in production elsewhere in the enterprise.  Trouble is, now the 5550 will not boot, it gets stuck after a panic message, and reboots:

Panic: Init Thread - Module SSM-4GE-INC is not present. Rebooting...

I'm taking this as the unit cannot function without this module installed, so I'm looking for confirmation of this, or alternatively a way around the message I'm getting.

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Can asa5550 run without SSM-4GE-INC?

Unfortunately ASA5550 comes with fixed SSM-4GE card and it can't be removed, hence you are getting that error message.

You would probably need to source that 4GE card back and installed it for it to boot again.

5 REPLIES
Cisco Employee

Can asa5550 run without SSM-4GE-INC?

Unfortunately ASA5550 comes with fixed SSM-4GE card and it can't be removed, hence you are getting that error message.

You would probably need to source that 4GE card back and installed it for it to boot again.

New Member

Can asa5550 run without SSM-4GE-INC?

Thanks for confirming my suspicions, much appreciated!

New Member

Re: Can asa5550 run without SSM-4GE-INC?

Hi Jennifer,

Could we use Cisco ASA 5550 with SSM-4GE instead of SSM-4GE-INC? I see the message:

***

Total SSMs found: 1

SSM-4GE, SN JAF10490559, HW ver 1.0, FW ver 1.0(0)8

WARNING: Incompatible SSM-4GE module (Cisco 4-Port Gigabit Ethernet Module) detected. This configuration is not supported

***

Thank you.

Can asa5550 run without SSM-4GE-INC?

Why do you ask? Doesn't the message clearly say that it's not compatible?)

Actually, before i saw your post i thought that 5550 uses regular SSM-4GE module.

Cisco Employee

Re: Can asa5550 run without SSM-4GE-INC?

No, for ASA 5550 you can't use the spare SSM-4GE as it has one that is already included within the appliance and is not supposed to be removed.

3847
Views
6
Helpful
5
Replies
CreatePlease to create content