04-25-2014 09:35 PM - edited 03-11-2019 09:07 PM
hi all,
i'm trying to create a trust point and an identity certificate at the same time but the ASA can't seem to allow me.
i tried to do it both in CLI and ASDM but no avail. anything i'm missing here?
ASA5505(config)# crypto ca authenticate TP-5505
ERROR: receiving Certificate Authority certificate: status = FAIL, cert length = 0
Solved! Go to Solution.
04-26-2014 05:17 PM
It looks like you're trying to authenticate your device's issued identity certificate before you have told the ASA to trust the issuing CA.
Have a look at this Cisco document and refer to Step 3 (paragraph 8 onward specifically)
04-26-2014 05:17 PM
It looks like you're trying to authenticate your device's issued identity certificate before you have told the ASA to trust the issuing CA.
Have a look at this Cisco document and refer to Step 3 (paragraph 8 onward specifically)
04-26-2014 05:17 PM
thanks marvin!
been looking around for a good cisco doc.
i let my google skills down while trying to figure out my ASA config.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide