Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can't see zone firewall cmds on router

This weekend I am installing a new 3845 router into my network and configuring ZBW on it. When I am in config mode, I cannot see the "zone" command to define zones.

I'm running Cisco IOS Software, 3800 Software (C3845-ADVSECURITYK9-M), Version 12.4(23), RELEASE SOFTWARE (fc1).

What am I missing? In SDM, the Firewall feature is available.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Can't see zone firewall cmds on router

For that platform Zone Based Firewall requires at least the following:

12.4(24)T

c3845-advsecurityk9-mz.124-24.T.bin

12.4(22)T

c3845-advsecurityk9-mz.124-22.T.bin

12.4(20)T1

c3845-advsecurityk9-mz.124-20.T1.bin

12.4(20)T

c3845-advsecurityk9-mz.124-20.T.bin

12.4(11)XW10

c3845-advsecurityk9-mz.124-11.XW10.bin

12.4(11)XW9

c3845-advsecurityk9-mz.124-11.XW9.bin

12.4(11)XW7

c3845-advsecurityk9-mz.124-11.XW7.bin

12.4(11)XW6

c3845-advsecurityk9-mz.124-11.XW6.bin

12.4(11)XW5

c3845-advsecurityk9-mz.124-11.XW5.bin

12.4(9)T7

c3845-advsecurityk9-mz.124-9.T7.bin

12.4(6)T11

c3845-advsecurityk9-mz.124-6.T11.bin

12.4(6)T10

c3845-advsecurityk9-mz.124-6.T10.bin

2 REPLIES

Re: Can't see zone firewall cmds on router

For that platform Zone Based Firewall requires at least the following:

12.4(24)T

c3845-advsecurityk9-mz.124-24.T.bin

12.4(22)T

c3845-advsecurityk9-mz.124-22.T.bin

12.4(20)T1

c3845-advsecurityk9-mz.124-20.T1.bin

12.4(20)T

c3845-advsecurityk9-mz.124-20.T.bin

12.4(11)XW10

c3845-advsecurityk9-mz.124-11.XW10.bin

12.4(11)XW9

c3845-advsecurityk9-mz.124-11.XW9.bin

12.4(11)XW7

c3845-advsecurityk9-mz.124-11.XW7.bin

12.4(11)XW6

c3845-advsecurityk9-mz.124-11.XW6.bin

12.4(11)XW5

c3845-advsecurityk9-mz.124-11.XW5.bin

12.4(9)T7

c3845-advsecurityk9-mz.124-9.T7.bin

12.4(6)T11

c3845-advsecurityk9-mz.124-6.T11.bin

12.4(6)T10

c3845-advsecurityk9-mz.124-6.T10.bin

New Member

Re: Can't see zone firewall cmds on router

Thanks! I was looking in the wrong IOS download section! I was looking at mainline.

177
Views
0
Helpful
2
Replies