cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
435
Views
0
Helpful
2
Replies

cannot access specific IP address when VPNed in

gflorescu
Level 1
Level 1

I have recently changed some of the routing on my ASA 5540 and I am routing ip address 172.16.0.25 thru a different interface than all of my other traffic.

I can get to this IP from the inside interface and also from the DMZ but I cannot get to it when I'm VPNed in.

Before I made the routing changes, I could get to the IP address just fine. Here's my config:

S 172.16.0.25 255.255.255.255 [1/0] via 192.168.99.2, test

S 172.31.13.0 255.255.255.0 [1/0] via 172.31.0.1, inside

VPN clients get ips in the range of 172.31.13.x

Is there a fix for this?

2 Replies 2

andrew.prince
Level 10
Level 10

Check the following:-

1) NAT

2) No-nat

3) access-list from lower to higher

I talked to Cisco TAC and the only way to get this working is to create a new VPN pool that goes thru the other interface.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card