I am again having another problem with my NATTED ip.
We have connected a server on one of the Firewall interface. I can Ping the server 10.26.34.20 from the Firewall context at the same time, I can ping the 10.10.10.10 server from the firewall. I have configured, NAT for 10.10.10.10 to be represented as 10.26.34.10. I however cannot PING 10.26.34.10 from 10.10.10.10
I am attaching logs from our firewall and please let me know where I might have gone wrong.
I have already carried it out and I am able to see hits on the Firewall logs, however, I am still unable to PING the server. I have a good route since I am already able to translate 10.10.10.10 to 10.26.34.10.
I can ping the two server IF i am on the Firewall COntext.
I am getting these on the FIREWALL LOGs
%FWSM-6-305009: Built static translation from VLAN300:10.10.10.10 to VLAN1300:10.26.34.10
%FWSM-6-302020: Built outbound ICMP connection for faddr 10.26.34.20/33539 gaddr 10.26.34.10/33539 laddr 10.10.10.10/8
%FWSM-6-302020: Built outbound ICMP connection for faddr 10.26.34.20/17533 gaddr 10.26.34.10/17533 laddr 10.10.10.10/8
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...