I had ASDM working on the management interface and then I changed the IP address. When I did that I can not get into anymore. I have "http server enable" and "http x.x.x.x x.x.x.x management". I can ping the interface so I know I can get to it. I even redid the key but still can not get in. Anyone have any ideas?
Are you trying to access the management IP address from inside hosts? Are you sharing a layer 3 switch for both management and inside network? If that is the case, I guess you could be facing some sort of assymetric routing issue. Try accessing the inside interface IP instead of Management IP and see if that helps.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...