I Have Cisco 5540 with AIP-SSM-40, recently i config AIP-SSM-40 to capture all traffic from all interface any to any with promiscous mode and if card fail traffic still flow throuh asa, but after that i can't login to cisco ASDM, the error is "Un Able To Launch Device Manager From xx.xx.xx.xx"
If you can still connect to the CLI, go in and remove the IPS configuration from the ASA itself. All should need to do is remove the IPS from the service policy. See if this gets you back in. Also do a sh run http and see if the configuration looks good.
I can't say that after configuring an IPS module I couldn't get back into the ASDM.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...