04-29-2009 02:53 PM - edited 03-11-2019 08:25 AM
I was about to upgrade my FW pair from 3.1.2 to 3.2.6 and, as a rule, I'm supposed to upgrade the Secondary first, however, I cannot ping anything nor tftp anything from the secondary. I feel like I'm missing something very basic.
Any Ideas?
Solved! Go to Solution.
04-30-2009 04:49 AM
routing.
this was my problem with the standby firewall (PIX/ASA) whenever trying to use tftp. unless you're using static routes and the tftp server is not on the same subnet as the fwsm, you may have to add a static route pointing to the tftp server - add it to the primary so it replicates to the secondary.
04-30-2009 04:49 AM
routing.
this was my problem with the standby firewall (PIX/ASA) whenever trying to use tftp. unless you're using static routes and the tftp server is not on the same subnet as the fwsm, you may have to add a static route pointing to the tftp server - add it to the primary so it replicates to the secondary.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: