Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cannot tftp from stanby FWSM

I was about to upgrade my FW pair from 3.1.2 to 3.2.6 and, as a rule, I'm supposed to upgrade the Secondary first, however, I cannot ping anything nor tftp anything from the secondary. I feel like I'm missing something very basic.

Any Ideas?

1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Re: Cannot tftp from stanby FWSM

routing.

this was my problem with the standby firewall (PIX/ASA) whenever trying to use tftp. unless you're using static routes and the tftp server is not on the same subnet as the fwsm, you may have to add a static route pointing to the tftp server - add it to the primary so it replicates to the secondary.

1 REPLY
Gold

Re: Cannot tftp from stanby FWSM

routing.

this was my problem with the standby firewall (PIX/ASA) whenever trying to use tftp. unless you're using static routes and the tftp server is not on the same subnet as the fwsm, you may have to add a static route pointing to the tftp server - add it to the primary so it replicates to the secondary.

118
Views
0
Helpful
1
Replies
CreatePlease to create content