Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

cant get to IPS via ASDM

I am trying to configure the IPS from within the ASDM but can't get to it. I've given the IPS module an IP address on the management IP range and one on the inside network range, but still can't get logged in through the ASDM. Any suggestions on what I am missin? The IPS version is

Cisco Intrusion Prevention System, Version 6.0(4)E1

What am I missing? Thanks

1 REPLY
Green

Re: cant get to IPS via ASDM

Do you have an access list in the sensor to allow access? Something like this below would allow any.

service-host

network-settings

access-list 0.0.0.0/0

or from a specific host...

service-host

network-settings

access-list /32

131
Views
0
Helpful
1
Replies
CreatePlease to create content