10-31-2011 08:57 AM - edited 03-11-2019 02:44 PM
Hi CSC'ers,
For DR purposes, we have two VPN tunnel endpoints on different ISP's at our head-end office. At our branch office, we have an ASA. I am wondering if for the purpose of re-pointing the tunnel from the branch to the DR endpoint at the head-end, it's as easy as:
no crypto map <map-name> <seq-num> set peer <ip_address_1>
crypto map <map-name> <seq-num> set peer <ip_address_2>
Where <ip_address_1> is the regular production endpoint, and <ip_address_2> is the DR endpoint.
Or is there any other command that I need to run to make the tunnel re-point take effect?
(Yes, I know I can have multiple peers set on a crypto map set peer, but we have reasons that we don't want to do that.)
Thanks,
Will
Solved! Go to Solution.
10-31-2011 03:17 PM
Will,
I dont know what DR means, but if what you want to do is just to change the peer for the VPN tunnel, then yes that is all you need to do
Let me know if you have any other questions.
Mike
10-31-2011 03:17 PM
Will,
I dont know what DR means, but if what you want to do is just to change the peer for the VPN tunnel, then yes that is all you need to do
Let me know if you have any other questions.
Mike
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: