11-27-2013 07:51 PM - edited 03-11-2019 08:10 PM
Is this possible with the 5505. I have run out of external IP addresses.
I want to accomplish the following:
Exertnal IP1 Port 80 to Internal IP1 Port 80
External IP 1 Port 8080 to Internal IP 2 Port 8080 or 80
So, one external IP address with two different port number allowed externally going to two different internal IP addresses?
Any assistance will be appreciated. Just getting the first answer as to whether the 5505 can do the above would be helpful. Then actually finding someone to help me do this would be even better. I will pay for assistance if what I want to accomplish is indeed possible.
Arnold at Networkologist dot com
11-28-2013 05:32 AM
Yes, what version are you running.
7.0 or above
static (inside,outside) tcp interface 80 192.168.10.12 80 netmask 255.255.255.255
static (inside,outside) tcp interface 8080 192.168.10.55 80 netmask 255.255.255.255
8.3 or above
object network 192.168.10.12
host 192.168.10.12
nat (inside,outside) static interface service tcp www www
object network 192.168.10.55
host 192.168.10.55
nat (inside,outside) static interface service tcp www 8080
Value our effort and rate the assistance!
11-29-2013 10:00 PM
???????????
Value our effort and rate the assistance!
12-01-2013 08:07 PM
Do you still need assistance??
Value our effort and rate the assistance!
12-01-2013 08:30 PM
Solved. Thank you for your follow up.
12-02-2013 07:22 AM
Thank you for letting us help you, could you please mark the ticket as answered please.
Value our effort and rate the assistance!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: