Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 6513 Version 12.2(18)

I am unable to remove an access list. Currently this this access list contains 4 lines of remarks. I was unsure if I was entering the command correctly and now I have 4 lines of "trash" that needs to be removed.

Symptoms:

     The "sh run" command shows that I have access-list 100 defined.

     The "sh access-list" returns nothing.

Process I have tried:

     config t

     no access-list 100

     ...

     no access-list remark Test (just trying anything at this point)

     ...

     clear configure access-list 100 (This returns "Invalid input detected at '^' marker" and the '^' is under the 'e' in clear.)

So the "clear configure" command is not working.  The "no access-list" commands does not return an error but does not remove anything.

What step am I missing? Let me know if I can provide any more information.

...

2 REPLIES

Cisco 6513 Version 12.2(18)

Hi

gues you are using IOS ?

no access-list 100 should be sufficent.

What says the startup-config ??

Try a search in the BugDatabase maybe you hit a bug.

HTH

Patrick

New Member

Cisco 6513 Version 12.2(18)

Ended up opening a TAC. Seems that if you have an Access-list that contains only remarks then you can not remove it. I had to first add 'permit any any' to the access-list. Then I was able to remove it with 'no access-list 100'.

373
Views
0
Helpful
2
Replies
CreatePlease login to create content