Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Cisco ASA 5200 - Multiple External IPs

Hi,

I'm setting up a network with 2x Cisco routers in front, going to 2x Cisco ASA 5200 (in Failover) and then onto the network. We've a /24 Public IP range and was wondering what was the best way to configure the firewalls. I've heard the Transparent Mode has VPN issues, the Firewalls themselves wouldn't be controlling VPN, we'd pass it through to an ISA box. Is there a better way of doing this however?

Thanks in advance,

Joni.

2 REPLIES
Silver

Re: Cisco ASA 5200 - Multiple External IPs

VPN failover is not supported on units running in multiple context modes. VPN failover is available for Active/Standby failover configurations only.

For training go to this link, it has some training for the ASA:

http://www.cisco.com/web/learning/le31/le29/configuring_asa_pix_security_appliances.html

Community Member

Re: Cisco ASA 5200 - Multiple External IPs

Thanks.

I'm happy enough to use active/passive just as long as it won't present any issues with our connection! Will read through the link and see what I end up with!

CHeers,

Jonny.

1849
Views
0
Helpful
2
Replies
CreatePlease to create content