12-27-2013 01:52 PM - edited 03-11-2019 08:22 PM
I am having some issues getting the dmz server up and running.
I have internet access from inside.
I would like internet access from dmz.
Also outside to dmz.
I have tried adding static routes and configuring the ACL to no avail. I know this is pre-8.3; so I couldn't find any nat examples before the change.
Here is my current config:
: Saved
:
ASA Version 8.0(2)
!
hostname ciscoasa
enable password -------- encrypted
names
!
interface Vlan1
nameif inside
security-level 100
ip address 100.200.301.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address 100.200.300.18 255.255.255.240
!
interface Vlan3
no forward interface Vlan1
nameif dmz
security-level 50
ip address 10.10.10.1 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
switchport access vlan 3
!
interface Ethernet0/3
!
interface Ethernet0/4
shutdown
!
interface Ethernet0/5
shutdown
!
interface Ethernet0/6
shutdown
!
interface Ethernet0/7
shutdown
!
passwd -------- encrypted
boot system disk0:/asa803-k8.bin
ftp mode passive
pager lines 24
logging enable
logging buffer-size 30000
logging buffered debugging
mtu inside 1500
mtu outside 1500
mtu dmz 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-602.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 100.200.301.0 255.255.255.0
route outside 0.0.0.0 0.0.0.0 100.200.300.17 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable
http 100.200.301.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
no crypto isakmp nat-traversal
telnet timeout 5
ssh 100.200.300.18 255.255.255.255 outside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
!
service-policy global_policy global
username admin password xxxxxencrypted privilege 15
prompt hostname context
Cryptochecksum----------
: end
asdm image disk0:/asdm-602.bin
no asdm history enable
12-29-2013 06:03 AM
you need NAT. By default internet access from inside and DMZ will work. Higher security level. Inside to DMZ as well.
In CLI: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/ime/8_0_2/config/asa.html
Google is your friend
And also upgrade to 8.2.(5). 8.0(2) is very buggie...
---
Posted by WebUser Erik Boss from Cisco Support Community App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: