Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco ASA 5505 ASDM Image File missing

I've been trying to configure this Cisco ASA 5505 for days now. I used to be able to use the ASDM gui application, but i've since transitioned into using the CLI. Trying to go back to ASDM, it won't let me get back in, and when i try show asdm image, it says Device Manager image file not set. I have no CD for this device and I need that image file for the ASDM. How can I locate the file and install it on the router so I can use it?

2 REPLIES
Red

Cisco ASA 5505 ASDM Image File missing

Hi Adam,

You would need to download the ASDM image from the link below, make sure your login id has proper downloading rights:

http://www.cisco.com/cisco/software/release.html?mdfid=280582808&flowid=4377&softwareid=280775064&release=6.4.9&relind=AVAILABLE&rellifecycle=&reltype=latest

Hope that helps.

Thanks,
Varun Rao
Security Team,
Cisco TAC

Thanks, Varun Rao Security Team, Cisco TAC
New Member

Cisco ASA 5505 ASDM Image File missing

Hi Adam!

If the ASDM-image is still on the flash:

Do a "show flash" and look for the asdm-image file. It's named asdm-xxx.bin, where xxx=version.

Then in config mode, type "asdm image disk0:/asdm-xxx.bin"

Hope this helps!

15426
Views
0
Helpful
2
Replies