Routing now form local LAN to outside-2 working fine thanks to you .
I have other network with Netscreen where local network is 192.168.33.0/24. I setup the VPN tunnel between Cisco and netscreen working fine (policy based setup in Netscreen).
Inside the VPN tunnel everything is working (can ping, access shares). But I cannot get to work traffic which should go out using outside-2 (traffic is coming from the network 192.168.33.0/24 over VPN). I can see that traffic is forward to the correct interface (outside-2), but as nat exemption rule is active then it will not work.
I need to disable nat exemption rule for traffic which will go interface outside-2 and coming form the network 192.168.33.0/24. I tried, but no luck. I have not done this kind of rule before.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...