Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco ASA 5510 blinking status led

Hello,

We have a Cisco ASA 5510 which fails to respond.

Its status led keeps blinking.

I powered off and powered on the unit but the behavior is always the same.

With a console connection, only this line is shown:  "Booting system, please wait..."

Could anybody help me?  :-)

Thanks in advance.

4 REPLIES
Hall of Fame Super Silver

Cisco ASA 5510 blinking status led

It would usually indicate a hardware issue. You could possibly open up the ASA and reseat the RAM module and the internal compact flash card as a troubleshooting check. If that doesn't fix it you may need to replace the hardware.

Do you have Smartnet support?

New Member

Hello,

Hello,

Thank you Marvin Roads for your answer which really helped me last time. My problem was a little bit different but i succeeded in fixing that!

New Member

Hi mate,

Hi mate,

how did you fix the issue. I am having the same issue with Status light keep flashing after reload.

Before reload, only Active Light was turned Amber, and yes console just shows the message :

"Booting system, please wait..."

New Member

Hi,

Hi,

Have you already tried Marvin Rhoads's solution?? "You could possibly open up the ASA and reseat the RAM module and the internal compact flash card as a troubleshooting check."

Because i tried it and it worked for me!

2724
Views
10
Helpful
4
Replies