Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco ASA 5510 Security Plus 5th port???

The Cisco ASA 5510 has 4 ethernet ports, a console port, AUX port, and a management port.

With the Security Plus for the ASA 5510 you can use 2 ports for 10/100/100 and 3 ports for 10/100 (or 5 ports for 10/100).

Where is this fifth port coming from exactly?

What 2 ports are GE?

Thank you!

-rya

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Cisco ASA 5510 Security Plus 5th port???

Sorry I missed your other quesiton. In older code versions, the management port is the 5th port when you use the 'no management-only' command. In newer versions, this just becomes the 5th interface by default.

-Mike

3 REPLIES
Cisco Employee

Re: Cisco ASA 5510 Security Plus 5th port???

Hello,

The interfaces are described at the link below. 0/0 and 0/1 will be your gigabit interfaces.

http://www.cisco.com/en/US/docs/security/asa/asa82/license/license82.html

Hope that helps.

-Mike

Cisco Employee

Re: Cisco ASA 5510 Security Plus 5th port???

Sorry I missed your other quesiton. In older code versions, the management port is the 5th port when you use the 'no management-only' command. In newer versions, this just becomes the 5th interface by default.

-Mike

New Member

Re: Cisco ASA 5510 Security Plus 5th port???

Thank you!  I was having problems trying to locate this info on the Cisco ASA pages.  I was thinking it had to be the management port, but wanted to be 100% sure. 

Thanks again!

-rya

295
Views
0
Helpful
3
Replies
CreatePlease to create content