Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco ASA 5512x port forwading

I am trying to configure port forwarding from outside public ip address 50.xxx.206.91 to inside host 192.168.1.40. Port range tcp/udp 30000-30060.

Outside ip address of the firewall is .90

I can also use ip address of the outside interface if that is easier. 

I am running IOS 9.1 ASDM 7.1.

Please help. I tried many different ways and not sure what I am doing wrong. Thanks

1 REPLY

This should do the trick.You

This should do the trick.

You can name the objects whatever you want. The following are purely examples.

object-group service TCPUDP-30000-30060
 service-object tcp-udp destination range 30000 30060

object network inside-192.168.1.40
host 192.168.1.40
nat (inside,outside) static 50.xx.206.91

access-list outside_in extended permit object-group TCPUDP-30000-30060 any4 object inside-192.168.1.40

 

92
Views
0
Helpful
1
Replies
CreatePlease to create content