Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco ASA 5520 two external subnets on different interfaces

I have two subnets one on interface 3 and one on interface 2.  interfaces 3 was the first one setup with a default route.  Interface 2 was just added with the new subnet and I can recieve traffic to the 10.7.5.1 server but it appears that the traffic won't get back out to the internet.  Any help would be much appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: Re:Cisco ASA 5520 two external subnets on different interfac

You need a static default-route pointing to the sedond isp-router with a high admnistrative distance:

route (outside2) 0.0.0.0 0.0.0.0 75.XXX.XXX.61 100


Sent from Cisco Technical Support iPad App


--
Don't stop after you've improved your network! Improve the world by lending money to the working poor: http://www.kiva.org/invitedby/karsteni
5 REPLIES
New Member

Re:Cisco ASA 5520 two external subnets on different interfaces

Post your configuration so we can see how you are set up.

Sent from Cisco Technical Support Android App

New Member

Re:Cisco ASA 5520 two external subnets on different interfaces

New Member

Re:Cisco ASA 5520 two external subnets on different interfaces

the server in question is G-O-L-F and i'm trying to get it to route out 75.XXX.XXX.61.  When i hit the web address I can see on the server the connection is making it there but the web page never loads.  So i'm assuming that it wont route back out the outside2 interface like it's supposed to.

VIP Purple

Re: Re:Cisco ASA 5520 two external subnets on different interfac

You need a static default-route pointing to the sedond isp-router with a high admnistrative distance:

route (outside2) 0.0.0.0 0.0.0.0 75.XXX.XXX.61 100


Sent from Cisco Technical Support iPad App


--
Don't stop after you've improved your network! Improve the world by lending money to the working poor: http://www.kiva.org/invitedby/karsteni
New Member

Re: Re:Cisco ASA 5520 two external subnets on different interfac

thanks I was entering the rout wrong so the ASA wouldn't take the config.

179
Views
0
Helpful
5
Replies
CreatePlease to create content