cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1983
Views
0
Helpful
2
Replies

Cisco ASA 5540: ASDM Not accessible

robertstravis
Level 1
Level 1

I have an HA ASA 5540 pair where the ASDM will not load.  I have configured an identical pair of ASA 5540 where it does work in the same environment.

The ASAs are running 8.2(2)16...please see screenshots below for further information.  Your help would be greatly appreciated on how to troubleshoot this issue:

show config | grep http
aaa authentication http console LOCAL
http server enable

sh flash
--#--  --length--  -----date/time------  path
   95  16459776    Aug 11 2010 14:59:44  asa822-12-k8.bin
    3  8192        Aug 03 2010 11:13:30  log
   10  8192        May 08 2010 11:14:10  crypto_archive
   11  8192        Aug 03 2010 11:13:42  coredumpinfo
   12  43          Aug 03 2010 11:13:42  coredumpinfo/coredump.cfg
   89  16478208    Aug 10 2010 19:37:18  asa822-16-k8.bin
   92  8192        Aug 11 2010 06:31:57  tmp
   94  14240396    Aug 11 2010 14:02:33  asdm-631.bin

sh run | grep asdm
logging asdm informational
asdm image disk0:/asdm-631.bin
no asdm history enable

1 Accepted Solution

Accepted Solutions

balajirajahpb
Level 1
Level 1

Dear Roberts,

Please enable http access to your inside interface

http network  subnetmask INTERFACE

Regards

Balajirajah P B

View solution in original post

2 Replies 2

balajirajahpb
Level 1
Level 1

Dear Roberts,

Please enable http access to your inside interface

http network  subnetmask INTERFACE

Regards

Balajirajah P B

Thanks Balajirajah!!  That was it...appreciate the help.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: