Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco ASA 5565

how to enable the telnet in ciscoASA 565 model firewall please suggest me anyone 

1 REPLY
Hall of Fame Super Silver

There is no such model as a

There is no such model as a 5565 or 565.

That aside, one enables telnet via the command:

     telnet <source address> <netmask> <source_interface>

...filling in your local information for each of the bracketed fields. For example:

     telnet 0.0.0.0 0.0.0.0 inside

...would allow telnet for any host via the inside interface.

Reference.

Note that it is recommended to NOT use telnet to access a firewall as you would be using an insecure access method to access a security appliance.

194
Views
0
Helpful
1
Replies