Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco ASA 7.2(2) and undersize packet

Hi,

I have one Cisco Catalyst 2960 connected to ASA 5520 as Trunk. The version on ASA is 7.2(2).

The port on the 2960 connected to ASA is reporting lost of undersize packet.

Is there any problem with this on version 7.2(2) or shuld I continue search for the problem.

Best Regards

Magnus

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Cisco ASA 7.2(2) and undersize packet

Hello,

Undersize packet is not a problem. Cisco devices keep a count of how many

undersize packets they have received but will still pass them through.

Mostly, undersize packets are generated due to driver issues. If you think

that it is still a problem, upgrade the code on the firewall.

Hope this helps.

Regards,

NT

3 REPLIES
Cisco Employee

Re: Cisco ASA 7.2(2) and undersize packet

Hello,

Undersize packet is not a problem. Cisco devices keep a count of how many

undersize packets they have received but will still pass them through.

Mostly, undersize packets are generated due to driver issues. If you think

that it is still a problem, upgrade the code on the firewall.

Hope this helps.

Regards,

NT

New Member

Re: Cisco ASA 7.2(2) and undersize packet

Okey!

Thanks!

Best Regards

Magnus

Bronze

Re: Cisco ASA 7.2(2) and undersize packet

Hello,

Please check the following DDTS/Bug if your Catalyst 2960 is working before 12.2(37)SE.

CSCsh17651
3560 connected via dot1q cause undersize counters to incress

Regards,

Shin

656
Views
0
Helpful
3
Replies