Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Cisco ASA 9.x 5585 Clustering help

Hello,

I am doing 2 x 5585x Firewalls Clustering. The cluster license is already enabled on both chassis. I have the following queries.

Requirement:

Firewalls must be transparent.

Management interface must be seperately accessed -->admin context with allocate interface with an ip address is ok??

The 2 firewalls should work in a Clustered manner.

Setup:

2 x 6509 Switches with VSS.

2 x 5585x firewalls in front of the Switches.

2 x 3945 Routers in front of the Firewalls (unfortunately, there is no outside switches provided by the customer on this solution, so the firewall outside interfaces must be configured to 3945 routers directly)

Spanned Etherchannel for the data interfaces and Cluster Control Link --> Do we need to setup seperate interfaces for data and CCL traffic or can we combine this together with a single pipe?

Can somebody share their clustering configuration experience so it would be a great help.

Regards

Jay

126
Views
0
Helpful
0
Replies
CreatePlease to create content