Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco ASA Multiple ISPs, Multiple Public IPs

Hi,

One of our customer has 3 different ISPs and he's using the Public IPs provided by these different ISPs for his Public facing servers. Obviously, each ISP is providing the IP addresses from entirely different address space. Can the same setup be used to bring the servers behind a Firewall and allow the Public IPs to be NATed or otherwise using a DMZ? If so, can you please explain with a sample config? Thanks in advance.

Ajay.

1 REPLY

Re: Cisco ASA Multiple ISPs, Multiple Public IPs

Hi Ajay,

Yes, it is possible, but you need to have all the 3 IPs routed through a single ISP:

MAIN ISP----ASA---- IP ISP 1

---- IP ISP 2

---- IP ISP 3

The MAIN IPS will need to route on the internet all the 3 IP/Subnets

The config is simple:

static (inside1,outside) netmask 255.255.255.255

static (inside2,outside) netmask 255.255.255.255

static (inside3,outside) netmask 255.255.255.255

The inside1,2,3 are VLANS created on the ASA inside interface.

Please rate if this helped.

Regards,

Daniel

1079
Views
0
Helpful
1
Replies